imported from "final" folder

.pio/libdeps/esp01_1m/ArtnetWifi/README.md

@@ -0,0 +1,91 @@
+# ArtnetWifi
+
+[![arduino-library-badge](https://www.ardu-badge.com/badge/ArtnetWifi.svg?)](https://www.ardu-badge.com/ArtnetWifi)
+
+An Art-Net library for Wifi-Arduino's. Tested on ESP8266, ESP32, Pi Pico W, WiFi101 (e.g. MKR1000) and WiFiNINA (e.g. NANO 33 IoT) devices.
+
+Note: this library assumes you are using a wifi module.
+
+Based on https://github.com/natcl/Artnet [master](https://github.com/natcl/Artnet/archive/master.zip)
+
+## Installation
+
+### Arduino IDE
+
+Navigate to **Sketch** -> **Include Library** -> **Manage Libraries...**,
+then search for `ArtnetWifi` and the library will show up. Click **Install** and the library is ready to use.
+
+### PlatformIO Core (CLI)
+
+```
+$ pio init --board nodemcuv2
+$ pio lib install artnetwifi
+```
+
+### Manual
+
+Place this in your `~/Documents/Arduino/libraries` folder.
+
+## Examples
+
+Different examples are provided, here is a summary of what each example does.
+
+### ArtnetWifiDebug
+
+Simple test for WiFi, serial and Art-Net.
+
+Example output (Serial Monitor, 115200 Baud):
+```
+DMX: Univ: 0, Seq: 0, Data (48): 17 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...
+```
+
+If this example is not working, don't try anything else!
+
+### ArtnetWifiDebug2 (ArtnetWifiDebug with C++11 style)
+
+See **ArtnetWifiDebug**.
+
+**Note:** Not all controllers support this type of code!
+
+### ArtnetWifiFastLED
+
+This example will receive multiple universes via Art-Net and control a strip of WS2812 LEDs via the [FastLED library](https://github.com/FastLED/FastLED). It is similar to the NeoPixel example but it will work on the ESP32 and the ESP8266 controller as well.
+
+### ArtnetWifiNeoPixel
+
+This example will receive multiple universes via Art-Net and control a strip of WS2811 LEDs via Adafruit's [NeoPixel library](https://github.com/adafruit/Adafruit_NeoPixel).
+
+### ArtnetWifiTransmit
+
+This is a simple transmitter. Send 3 byte over into the Art-Net, to make a RGB light ramp-up in white.
+
+
+### Notes
+
+The examples `FastLED` and `NeoPixel` can utilize many universes to light up hundreds of LEDs.
+Normaly Art-Net frame can handle 512 bytes. Divide this by 3 colors, so a single universe can
+have 170.66 LEDs. For easy access, only 170 LEDs are used. The last 2 byte per universe are "lost".
+
+**Example:** 240 LEDs, 720 Byte, 2 Universes
+
+**Universe "1"**
+
+|Byte |  1|  2|  3|...|508|509|510|511|512|
+|:----|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
+|Color|  R|  G|  B|...|  R|  G|  B| x | x |
+|LED  |  1|  1|  1|...|170|170|170|   |   |
+
+**Universe "2"**
+
+|Byte |  1|  2|  3|...|208|209|210|
+|:----|:-:|:-:|:-:|:-:|:-:|:-:|:-:|
+|Color|  R|  G|  B|...|  R|  G|  B|
+|LED  |171|171|171|...|240|240|240|
+
+*You only have to send 510 byte DMX-data per frame. Extra byte(s) at the end will be ignored!*
+
+# Art-Net
+
+Art-Net(tm) is a trademark of Artistic Licence Holdings Ltd. The Art-Net protocol and associated documentation is copyright Artistic Licence Holdings Ltd.
+
+[Art-Net](http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf)