imported from "final" folder

.pio/libdeps/esp01_1m/FastLED/examples/FxDemoReel100/FxDemoReel100.ino

@@ -0,0 +1,70 @@
+/// @file    FxDemoReel100.ino
+/// @brief   DemoReel100 effects collection with ScreenMap
+/// @example FxDemoReel100.ino
+///
+/// This sketch is fully compatible with the FastLED web compiler. To use it do the following:
+/// 1. Install Fastled: `pip install fastled`
+/// 2. cd into this examples page.
+/// 3. Run the FastLED web compiler at root: `fastled`
+/// 4. When the compiler is done a web page will open.
+
+#include <FastLED.h>
+#include "fx/1d/demoreel100.h"
+#include "fl/screenmap.h"
+#include "defs.h"  // for NUM_LEDS
+
+
+#if !HAS_ENOUGH_MEMORY
+void setup() {}
+void loop() {}
+#else
+
+
+using namespace fl;
+
+#define DATA_PIN    3
+//#define CLK_PIN   4
+#define LED_TYPE    WS2811
+#define COLOR_ORDER GRB
+#define NUM_LEDS    64
+
+CRGB leds[NUM_LEDS];
+
+#define BRIGHTNESS          96
+#define FRAMES_PER_SECOND  120
+#define USES_RGBW 0
+
+#if USES_RGBW
+Rgbw rgbwMode = RgbwDefault();
+#else
+Rgbw rgbwMode = RgbwInvalid();  // No RGBW mode, just use RGB.
+#endif
+
+DemoReel100Ptr demoReel = fl::make_shared<DemoReel100>(NUM_LEDS);
+
+void setup() {
+  ScreenMap screenMap = ScreenMap::DefaultStrip(NUM_LEDS);
+  
+  // tell FastLED about the LED strip configuration
+  FastLED.addLeds<LED_TYPE,DATA_PIN,COLOR_ORDER>(leds, NUM_LEDS, 2.0f)
+    .setCorrection(TypicalLEDStrip)
+    .setScreenMap(screenMap)
+    .setRgbw(rgbwMode);
+
+  // set master brightness control
+  FastLED.setBrightness(BRIGHTNESS);
+}
+
+void loop()
+{
+    // Run the DemoReel100 draw function
+    demoReel->draw(Fx::DrawContext(millis(), leds));
+
+    // send the 'leds' array out to the actual LED strip
+    FastLED.show();  
+    // insert a delay to keep the framerate modest
+    FastLED.delay(1000/FRAMES_PER_SECOND); 
+}
+
+
+#endif // HAS_ENOUGH_MEMORY