imported from "final" folder

.pio/libdeps/esp01_1m/FastLED/examples/OctoWS2811/OctoWS2811.ino

@@ -0,0 +1,10 @@
+/// @file    OctoWS2811.ino
+/// @brief   OctoWS2811 example with platform detection
+/// @example OctoWS2811.ino
+
+// Platform detection logic
+#if defined(__arm__) && defined(TEENSYDUINO) && !defined(__MKL26Z64__)  // Teensy LC
+#include "OctoWS2811_impl.h"
+#else
+#include "platforms/sketch_fake.hpp"
+#endif

.pio/libdeps/esp01_1m/FastLED/examples/OctoWS2811/OctoWS2811_impl.h

@@ -0,0 +1,55 @@
+
+// BasicTest example to demonstrate how to use FastLED with OctoWS2811
+
+// FastLED does not directly support Teensy 4.x PinList (for any
+// number of pins) but it can be done with edits to FastLED code:
+// https://www.blinkylights.blog/2021/02/03/using-teensy-4-1-with-fastled/
+
+#include <OctoWS2811.h>
+
+#define USE_OCTOWS2811
+#include <FastLED.h>
+
+using namespace fl;
+
+#define NUM_LEDS  1920
+
+CRGB leds[NUM_LEDS];
+
+#define RED    0xFF0000
+#define GREEN  0x00FF00
+#define BLUE   0x0000FF
+#define YELLOW 0xFFFF00
+#define PINK   0xFF1088
+#define ORANGE 0xE05800
+#define WHITE  0xFFFFFF
+  
+void setup() {
+  Serial.begin(9600);
+  Serial.println("ColorWipe Using FastLED");
+  FastLED.addLeds<OCTOWS2811,GRB>(leds,NUM_LEDS/8);
+  FastLED.setBrightness(60);
+}
+
+
+
+void colorWipe(int color, int wait)
+{
+  for (int i=0; i < NUM_LEDS; i++) {
+    leds[i] = color;
+    FastLED.show();
+    delayMicroseconds(wait);
+  }
+}
+
+
+void loop() {
+  int microsec = 6000000 / NUM_LEDS;
+  colorWipe(RED, microsec);
+  colorWipe(GREEN, microsec);
+  colorWipe(BLUE, microsec);
+  colorWipe(YELLOW, microsec);
+  colorWipe(PINK, microsec);
+  colorWipe(ORANGE, microsec);
+  colorWipe(WHITE, microsec);
+}