imported from "final" folder

.pio/libdeps/esp01_1m/FastLED/examples/TeensyParallel/TeensyParallel.ino

@@ -0,0 +1,88 @@
+
+// This is an prototype example for the ObjectFLED library for massive pins on
+// teensy40/41.
+
+#if !defined(__IMXRT1062__) // Teensy 4.0/4.1 only.
+#include "platforms/sketch_fake.hpp"
+#else
+
+#define FASTLED_USES_OBJECTFLED
+
+#include "FastLED.h"
+#include "fl/warn.h"
+
+using namespace fl;
+
+#define PIN_FIRST 3
+#define PIN_SECOND 1
+#define IS_RGBW false
+
+#define NUM_LEDS1 (22 * 22)
+#define NUM_LEDS2 1
+CRGB leds1[NUM_LEDS1];
+CRGB leds2[NUM_LEDS2];
+
+void wait_for_serial() {
+    uint32_t end_timeout = millis() + 3000;
+    while (!Serial && end_timeout > millis()) {}
+}
+
+void print_startup_info() {
+    Serial.println("Start");
+    Serial.print("*********************************************\n");
+    Serial.print("* TeensyParallel.ino                        *\n");
+    Serial.print("*********************************************\n");
+    Serial.printf(
+        "CPU speed: %d MHz   Temp: %.1f C  %.1f F   Serial baud: %.1f MHz\n",
+        F_CPU_ACTUAL / 1000000, tempmonGetTemp(),
+        tempmonGetTemp() * 9.0 / 5.0 + 32, 800000 * 1.6 / 1000000.0);
+}
+
+void dump_last_crash() {
+  if (CrashReport) {
+    Serial.println("CrashReport:");
+    Serial.println(CrashReport);
+  }
+}
+
+void setup() {
+    Serial.begin(115200);
+    wait_for_serial();
+    dump_last_crash();
+    CLEDController& c1 = FastLED.addLeds<WS2812, PIN_FIRST, GRB>(leds1, NUM_LEDS1);
+    CLEDController& c2 = FastLED.addLeds<WS2812, PIN_SECOND, GRB>(leds2, NUM_LEDS2);
+    if (IS_RGBW) {
+        c1.setRgbw();
+        c2.setRgbw();
+    }
+    FastLED.setBrightness(8);
+}
+
+void fill(CRGB color) {
+    for (int i = 0; i < NUM_LEDS1; i++) {
+        leds1[i] = color;
+    }
+    for (int i = 0; i < NUM_LEDS2; i++) {
+        leds2[i] = color;
+    }
+}
+
+void blink(CRGB color, int times, int delay_ms = 250) {
+    for (int i = 0; i < times; ++i) {
+        fill(color);
+        FastLED.show();
+        delay(delay_ms);
+        fill(CRGB::Black);
+        FastLED.show();
+        delay(delay_ms);
+    }
+}
+
+void loop() {
+    blink(CRGB::Red, 1);
+    blink(CRGB::Green, 2);
+    blink(CRGB::Blue, 3);
+    delay(500);
+}
+
+#endif //  __IMXRT1062__